company news about Good news: Our company has a number of voltage breakdown testing machines in stock

[Technical parameters of high temperature breakdown tester]

1. Dimensions: length 1.4 meters, width 1.2 meters, height 1.7 meters (material: brushed stainless steel)

2. The voltage regulator automatically returns to zero after tripping;

3. Zero closing, with automatic and manual voltage lifting;

4. Over-current protection, door interlocking and other safety protection functions.

5. Voltage and current display, measurement accuracy ±3%, breakdown voltage maintenance;

6. Test electrode: the diameter of the upper electrode is 75mm, and the height is 15mm; The lower electrode diameter is 25 mm, and the height is 25 mm (electrode: stainless steel)

7. Rated capacity: 20kv

8. Rated input/output voltage: 220V/50kV

9. Rated input/output current: 13A/0.06A

10. Five levels of boost speed are optional: 5V, 50V, 100V, 500V, 1000V, 2000V.

11. Easy to disassemble and assemble the oil bath Material: stainless steel (this can be according to customer requirements, or without oil bath)

12. The electrical dielectric strength tester is composed of an electric contact voltage regulator, a control box, a protective resistor, an electrode box and an oil bath.

13. The temperature fluctuates at ±0.5°C

14. The temperature range is RT+10-300°C

15. High temperature breakdown test chamber: ±3%

16. It is used for high-temperature breakdown voltage, high-temperature failure, hot punch and other tests of enameled wire; The enameled wire placed in the studio temperature is heated to the set temperature for a high-temperature breakdown voltage test, and the instrument can send a high-voltage breakdown signal and display the specific value of the breakdown voltage (accurate to single digits), and the voltage range is greater than 15kV