The plastic smoke density tester is a new type of testing equipment for measuring smoke density developed according to the technical conditions specified in the standard GB/8323.2-2008 and ISO5659-2 "Plastic Smoke Generation Part 2 Test Method for Determining Smoke Density by Single Chamber Method".
Scope of application: It is suitable for measuring the specific optical density of smoke produced by plastic combustion, and the maximum specific optical density is used as the test result. It is used to evaluate the fuming performance of plastics under specified conditions.
Conform to the standard: meet the requirements of GB8323.2-2008 "Plastic-Smoke Generation-Part II: Test Method for Determining Smoke Density by Single-chamber Method" and ISO5659.2-2006 "Plastic-Smoke Generation Part II: Determination of Optical Density by Single-chamber Method".
Main parameters: The whole instrument is composed of a closed test chamber, a photometer measurement system, a radiation cone, a combustion system, an igniter, a test box, a bracket, a temperature measuring instrument and a smoke density test software; The circuit is developed by single-chip microcomputer, with high technical content and stable performance. The instrument is suitable for all plastics, but can also be used for the evaluation of other materials (e.g. rubber, textile coverings, lacquered surfaces, wood and other materials), and is widely used by production plants in the plastics industry, solid materials industry, and scientific research and testing units.
Your message must be between 20-3,000 characters!
